产品中心Products

TEL:17706672780

您当前的位置:首页 > 产品中心 > 凹版印刷机系列 > -

详细介绍

机械说明

产品图片

The products in the domestic first seven motor using advanced PLC control system (seven vector motor control of the closed-loop tension control system, four paragraphs from the Japan Proton positions in the motor cylinder + ABB + Germany + Japan Yaskawa Siemens PLC) machine with excellent rigidity and job stability, compact structure, attractive appearance, suitable for a variety of web, printing gravure film

 

The main structure and features:

 

 1 This machine is suitable for BOPP, PET, CPP, PVCD and the same nature film, paper, cellophane and aluminum foil. Its printing speed of 10-140 m / min, machine speed 150 m / min.

 2. Main drive: The main transmission vector of Japan Yaskawa inverter vector control motor, drive each plate. Features: saving electricity.

 

 3. Without shaft-mounted version of the agency: loaded version with the cylinder, pull the mandrel for loading, horizontal adjustment using screw movement. Features: reduce time to replace, to ensure concentricity, improve product quality.

 

 4 ink scraper: The blade can be adjusted up and down and at any angle, squeegee pressure single cylinder, lateral movement synchronous motor rotating cam. Features: extended version of the birthday noodles.

 

 5 imprint lifting mechanism: dual impression cylinder from the lock-bit step-up and slider, and down the cylinder on the cylinder leakage protection under the swap. Features: to ensure that the average pressure to ensure that color.

 

 6. Chromatic robot: the use of computer-controlled synchronous motor drive by ball screw gear adjustment, automatic trapping. Features: rotating lubrication, chromatography and high precision.

 

 7 received, discharge institutions: the use of duplex, close, release the tension and material collection, discharge tension with variable frequency vector control traction speed. Features: Acceleration chromatic stability, horizontal direction, save for large quantities of printed materials, inks, solvents and energy, then the expected speed of 120 m / min, then the biggest waste of material is about 10 meters, more than three motor savings of 40 meters, inks, solvents and energy saving about 20%, greatly reducing the cost of the main products.

 

 8. Drying and cooling structure: the use of centrifuges blowing smoke oven, electric oven tube located in each port of hair heating, oven heat within the formation of wind circulation, temperature control by the intelligent temperature controller, water cooled roll back to ensure that film cooling. Recycled air circulation. A cycle of every two-color equipment. Features: saving electricity

 

Main technical parameters:

 

 Model

GWASY-600A

(8 color)

GWASY-800A

(8 color)

GWASY-1000A

(8 color)

GWASY-1200A

(8 color)

 Plate diameter

 100-320mm

 100-320mm

 100-320mm

 100-320mm

Printing width

 600mm

 800mm

 1000mm

 1200mm

Unwinding diameter

 600mm

 600mm

600mm

 600mm

Winding diameter

 800mm

 800mm

 800mm

 800mm

Printing speed

 10-140 m / min

 10-140 m / min

 10-140 m / min

 10-140 m / min

Overlay accuracy

 ≤0.1mm

 ≤0.1mm

 ≤0.1mm

 ≤0.1mm

Drying

Electric heating (or steam or oil)

 Electric heating (or steam or oil)

Electric heating (or steam or oil)

 Electric heating (or steam or oil)

Machine power

108kw

 118kw

 128kw

 138kw

Weight

21000KG

 22500KG

 24000KG

 26000KG

Dimensions

14800*2700*2500mm

14800*2700*2500mm

14800*2900*2500mm

14800*3100*2500mm

返回列表

Copyright 2015 gwysjx.com All Rights Reserved 温州国伟印刷机械有限公司     保留所有权利     技术支持:联创网络